FACET-480532E ELECTRIC FUEL PUMP

12volt 2.5-8PSI

$572.00 Excludes GST

Not sure if this is suitable for you or your vehicle?

Get in touch with one of our technical experts by clicking the enquiry button

Enquire About this Product

Description

Facet 480532 Solid State Electronic 12V Fuel Pump (Cylindrical)

The Facet-Purolator (Cylindrical) Solid State Electronic Fuel Pump is suitable for cars, trucks, agricultural equipment, marine equipment and generators. The solid-state design provides greater reliability, longer life, easy installation, the solid -state design also prevents heat related vapor lock and cold start problems. When installed correctly the pump will provide a consistent, steady fuel supply in any conditions.

NAPA 610-1016

Compatibility:
Petrol
Diesel
Biodiesel
E85
Blended alcohol fuels
Fuel additives

Available Features:
12 - 24 inches dry lift
20 - 45 GPH 75-170 litres
2.5 - 8 PSI
Transient Protection-24 volt only
State of the art Electronics
Sealed Electronics
Built in Anti-Siphon Valve (Positive shut-off
Complies to Mil-std-461D
Replaceable 74 micron filter
Built in magnet to collect metal particles for additional filtration
1.6 amp average
Self Priming and Self Regulating
32 ounces and 5 inches
Corrosion Resistant over 100 hours of salt spray
Operating Temperature Range: -40F to 180F

Specification:
Part Number: 48053E
Kit Number:
Type: Gold-Flo
Volts: 12
Max/Min: 8.0 - 6.0
GPH: 45
Positive Lead: n/a
Negative Lead: n/a
Fittings: 1/4 - 18 NPTF
Lift Min: 24"
Check Valve: N
Positive Shut Off Valve: N
Internal Fuel Filter: 400U
Stainless Steel: N

Reliability: The new GOLD-FLO® Solid State Fuel Pump is an enhanced version of our Interrupter model. It has Solid State circuitry and will meet or exceed all performance specifications and is totally interchangeable. (These pumps have demonstrated an endurance life almost double that of the nearest competitor, according to our test data).

Easy to Install-Easy to Service: Two bolt mounting makes installations easy. Nothing to adjust. For best results, mount the pump close to the fuel tank and below the fuel level. The pump is self-priming to 24 inches vertical fuel lift. Vertical mounting is preferred to assure maintenance of rated pressures. An installation kit is available for replacement applications. The only service normally required is a simple cleaning of the filter and fuel inlet cavity.

Eliminates Vapor Lock: When properly installed on most vehicles a constant, smooth, dependable supply of fuel under pressure is assured in the hottest weather or in high altitudes.

Product Enquiry

map magnifiercross